MEIRI 26AJ Conditioner for transducer with strain gages

ME26AJ OR ME26AS

ANALOGIC OUTPUT ą 10V FOR STRAIN GAGES

Zero adjustment

	Load, pressure, torque...
	For any transducer with strain gages, (classic or piezoresistant)
	Accuracy and stability
	Transducer power supply
	Analogic output ą 10V or 0/20 mA or 4/20 mA
	Zero and gain adjustment
	Electronic calibration simulator
	Easy adjustment

Span adjustment

Calibration

Scale adjustment

Compatible with :
- 2680C multi-channels instrument,
- ME52 rail DIN mono-channel
- ME261B IP65 multi-channels.

APPLICATION AND CONNECTION

TECHNICAL FEATURES

Bridge power supply voltage, given by the board	10 V (other value on request)
Bridge impedance	from 350 Ohm to 1 KOhm. (features given for 350 Ohm)
Sensitivity of the transducer	from 0.5mV/V to 3.5 mV/V for the reference ME26AJ and from 5 to 35 mV/V for the reference ME26AS.
Electronic calibration simulator	1mV/V for ME26AJ and 10mV/V for ME26AS
Adjustable zero and gain by trimmer	Adjustable zero +/- 1mV/V for ME26AJ and +/- 10mV/V for ME26AS
Linearity	1. 10^-4
Analogic output	ą 10V / 0V analogic or 0-20 mA or 4-20mA / Ground
Output voltage bandwidth	1KHz (other value on request, from 100 Hz up to 10 KHz).
Protection	against short circuits.
Power supply	24 Vdc ą 2V
Consumption with 24 Vdc	40mA
Option RAL26EU	100 x 160 mm Europe adapter DIN 41612 connector