ME26CO

ANALOGIC OUTPUT ± 10V for INCREMENTAL ENCODER
or for OPTICAL RULER.

32 ranges per switch
Angle or position measuring
For any incremental encoder or ruler.
Accuracy and stability.
From 128 to more than 2 millions of steps.
Analogic output ±10 V or 4 - 20 mA
Adjustable analogic zero.
Electronic tare.
Programmable gain by switch.
Adjustable fine gain by potentiometer.
Numeric calibration simulator.
High bandwidth
Adjustable zero
Adjustable gain
Calibration
Analogic trigger
Reset
Scale adjustment
Compatible with : 
- 2680C  multi-channels instrument, 
- ME52 rail DIN mono-channel

 

APPLICATION AND CONNECTION

SCH-26CO.GIF (6200 octets)

 

TECHNICAL FEATURES

Incremental convertor encoder / voltage ± 10V.
Programmable ranges by switch from 128 to 2.000.000 full scale impulsions.
Input level from 3V to 24V (square signals with 90° phase)
Input frequency 200 kHz maximum.
Zero and gain adjustable by trimmer.
Reset by pushing switch, by remote contact or encodeur top zero 
Analogic input 0-10V for trigger in beginning and end of count.
Calibration simulator 1/4, 1/2, 3/4 and 1/1 of the count full scale.
Power supply  for transducer 5V 10mA Maxi or 24V 100mA Maxi.
(or outside power supply, for example in MEIRI 2680 ).
Linearity 0.5 10-3
Output signal ± 10V or 4-20mA
Output voltage bandwidth 1 KHz (another value on request).
Protection against short circuits.
Power supply 24 Vdc ± 2V
Option RAL26EU 100 x 160 mm Europe   adapter DIN 41612 connector