ME 26 DERIVE "SIGNAL
DRIFT" AMPLIFIER
ME 26 INT "SIGNAL INTEGRATOR" AMPLIFIER
 |
Zero adjustment |
|
||||||||||||
| Span adjustment | ||||||||||||||
| Calibration | ||||||||||||||
| Scale adjustment | ||||||||||||||
| Compatible
with : - 2680C multi-channels instrument, - ME52 rail DIN mono-channel - ME261B IP65 multi-channels. |
||||||||||||||
APPLICATION AND CONNECTION
TECHNICAL FEATURES
| Integration or Differentiation | from 1 msec to 1 sec (another range on request) |
| Inputs (admissible maximum ± 25V) Others ranges on request until +/- 200 Vdc |
Input voltage range : ± 10V Asymmetric input impedance : 100 kOhm Differential input impedance : 200 kOhm |
| Input current (option) | 0 - 20 mA or 4 - 20 mA |
| Output voltage | Maximum output voltage : ± 10V Maximum output current : 5 mA Maximum output impedance : 50 Ohm |
| Output voltage (option) | 0 to 20 mA or 4 to 20 mA |
| Gain ranges | Range I : from 1 to 5 Range II : from 5 to 25 Range III : from 25 to 125 |
| Zero adjustment | Fixed : 2 to 10% from the input range Variable : from 3 to 15% from the input range |
| Calibration simulator | 1V |
| Common mode rejection | 100dB |
| Power supply variations rejection (± 2V) | 100dB |
| Maximum noise in the input (White noise) | 0.2mV peak to peak |
| Maximum noise in the input (with ME 26 ISO) | 10mV peak to peak |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -40°C to +70°C |
| Protection | Against the short circuits |
| Power supply (Without charge in the output) | 24 Vdc ± 2V, 25 mA |
| Option RAL26EU | 100 x 160 mm Europe adapter DIN 41612 connector |
| Galvanic Insulation option with ME26ISO | with ME 26 ISO extension
card Input / Output Insulation : 500 V Input / Power supply Insulation: 500 V |
