ME 26 ICP
for piezzoelectric transducer with integrated electronic ,ICP type power supply (constant current).
- Application : Load, Druck, Acceleration, inclination ...

Zero adjustment
Voltage input : from ±20 mV to ± 10V
Transducer power supply in constant current (ICP)
Accuracy and stability
Analogic output ± 10V or 0 -20 mA 
or 4 - 20 mA
Zero and gain adjustment
Electronic calibration simulator
Bandwidth  20 kHz
Easy adjustment 
Span adjustment
Calibration
Scale adjustment

Compatible with : 
- 2680C  multi-channels instrument, 
- ME52 rail DIN mono-channel
- ME261B IP65 multi-channels.

 

APPLICATION AND CONNECTION

 

TECHNICAL FEATURES

Power supply (Without charge at the output) 24 VDC ± 2V, 25 mA
Transducer power supply Constant current 5mA
(tolerance -1mA,+2.5 mA)
Inputs (admissible maximum ± 25V) Input voltage range : ±20mV to ± 10V
Other range on request
Voltage output Maximum output voltage : ± 10 V
Maximum output current : 5 mA
Maximum output impedance : 50 Ohm
Current output (option) 0 to 20 mA or 4 to 20 mA
Zero adjustment ±10% from the full scale.
Calibration simulator 100mV or 1V (to specify, other on request)
Bandwidth (for -3dB) 20 KHz
10 KHZ with ME26ISO   insulation option
Linearity 10 -4  of the Full Scale
Zero maximum drift in the input 2µV/°C
Common mode rejection 100 dB
Power supply variations rejection (± 2V) 100 dB
Maximum noise in the input (White noise) 0.2 mV peak to peak
Maximum noise in the input
with ME 26 ISO		 10 mV peak to peak
Operating temperature 0°C to 50°C
Storage temperature -40°C to +70°C
Protection Against the short circuits
Option  RAL26EU 100 x 160 mm Europe  adapter DIN 41612 connector
Galvanic Isulation option with ME26ISO with extension card ME 26 ISO
Input / Output Insulation : 500 V
Input / Power supply Insulation:   500 V