| Power supply (Without charge in the output) |
24 VDC ± 2V, 25 mA |
| Transducer power supply |
5 VDC (or 26 VDC on request) |
Inputs (admissible maximum ± 25V)
for ME 26 U and ME 26 U/I
Others ranges on request (until +/- 200 VDC) |
Input voltage range : ± 10V
Asymmetric input impedance : 100 kOhm Differential input impedance : 200 kOhm |
| Current inputs (option) for ME 26 I/U and ME 26
I/I |
0 - 20 mA or 4 - 20 mA |
| Output voltage for ME 26 U and ME 26 I/U |
Maximum output voltage : ± 10 V
Maximum output current : 5 mA
Maximum output impedance : 50 Ohm |
| Output current (option) for ME 26 U/I and ME 26
I/I |
0 to 20 mA or 4 to 20 mA |
| Gain ranges |
Range I : from 1 to 5
Range II : from 5 to 25
Range III : from 25 to 125 |
| Zero adjustment |
Fixed : 2 to 10% from the input range
Variable : from 3 to 15% from the input range |
Calibration simulator for ME 26 U or ME 26 U/I
Calibration simulator for ME 26 I/U or ME 26 I/I |
1 V (other on request)
10 mA (other on request) |
| Bandwidth (at -3dB) |
1000 Hz (other on request) |
| Linearity |
10-4 |
| Maximum zero drift in the input |
2µV/°C |
| Common mode rejection |
100dB |
| Power supply variations rejection (± 2V) |
100dB |
| Maximum noise in the input (White noise) |
0.2mV peak to peak |
| Maximum noise in the input (with ME 26 ISO) |
10mV peak to peak |
| Operating temperature |
0°C to 50°C |
| Storage temperature |
-40°C to +70°C |
| Protection |
Against short circuits |
| Option RAL26EU |
100 x 160 mm Europe
adapter DIN 41612 connector |
Option Galvanic Insulation
(with the ME26
ISO board) |
with ME 26 ISO extension
board
Input / Output Insulation : 500 V
Input / Power supply Insulation: 500 V |
